Any drawings and details are prepared automatically under consideration of the respective codes. The user is enabled to set according to his esthetic mentality any visual adjustments which will be used for the preparation of the drawing. Any visual setting such as character sizes and types, fonts, colors, geometrical positions of the texts, hatching options, dimensioning line distances, types and colors of fonts used for dimensioning, the sizes and colors of the plan inscriptions, the distances to the edges of the drawing sheet or limitation of the sheet surface etc. are left to the initiative of the user. Besides visual settings, especially any parameters related to detail and reinforcement drawings are also left to the initiative of the user. Any reinforcement plan related parameters such as bending angle for bent-up reinforcements, design with/without bent-up reinforcements, whether the reinforcements shall pass over to the neighboring spans, and if yes, to which extend, total reinforcement length check (12 meters check), the height of the stirrup concentrating area at the bottom of the column are all adjustable parameters.

The following drawings and details can be prepared by the program :

Formwork plans of mushrooms with/without strips (flat slabs) and rib/waffle slabs;

Reinforcements plans;

Formwork section plans in any number and from any viewing angle and in any zigzag form in the depth;

Column application/position plan;

Stirrup details;

Drawing of new types of stirrups and S-irons with the help of the stirrup and S-iron command;

Longitudinal reinforcement details of columns;

Vertical elevation details of columns;

Reinforcement details of panels/shearwalls;

Longitudinal reinforcement details of panels/shearwalls;

Reinforcement details of beams;

Reinforcement details of column supports;

Reinforcement details of ribs;

Reinforcement details of waffles;

Foundation application/position plan;

Foundation section plans in any number and from any viewing angle and in any zigzag form in the depth;

Reinforcement details of continuous foundations;

Foundation/Column connecting rods;

Reinforcement details of single footings;

Reinforcement details of connection beams;

Reinforcement details of raft foundations with/without strips;

Horizontal sections of column/beam joining regions;

Sections, elevations, views of the entire building;

Making drawings independently of the structural analysis;

Drawing commands for the drawing of freehand drawn lines, beziers and nurbs besides any primitive objects such as lines, circles and arcs;

2D-Edit-Function;

Reinforcement details of stairs.

Home Page

ideCAD® STRUCTURAL IDS Home Page